Foil glue for printing onto garments, simply print the areas you want the foil to stick to. This foil adhesive can be screen printed, block printed or painted on to fabric. Once printed you can flash off the glue at a low temp causing it to dry slightly or drop your dryer temp to around 100C. The glue needs to be touch dry for the foil to stick. Place foil on fabric shiny side up then heat press at 160°C for approximately 30 seconds. Peel off the excess foil when cooled. Adhesive is water soluble when wet. Foil printed fabrics can be washed to temperatures up to 30°C. Use a mesh count of 32t-43t to print the foil glue allowing a good deposit on the garment.